Monneli Epochim PWT
AED0.00
Monneli Epochim PWT
New
Specification
| Adhesion strength>2 N/mm² | AppearanceLiquid coating | Application temperature+5°C to +35°C |
| Compressive strength80 N/mm² | Consumption5 m²/Liter at 200 micron DFT | Flexural strength40 N/mm² |
| Full cure7 days | Initial cure24 hours | Mix density at 25°C1.58 kg/L |
Found cheaper?
Description
EPOCHIM PWT is a two component, 100% solids, epoxy protective coating for concrete and steel. The cured film is resistant to corrosion, abrasion and chemical attack and is listed safe for potable water and incidental food contact.
Uses
- Internal reservoir waterproof coating for potable water
- Concrete or metal tanks
- Impervious chemical resistant coating for floors and walls
- Food factories, dairies, canning and bottling factories
- Breweries
Advantages
- Approved to use with potable water
- Eco-friendly - Low VOC
- Waterproof and protective coating with good aesthetic appearance
- High chemical and abrasion resistance
- Excellent adhesion to concrete and steel
- Application friendly
Specifications Monneli Epochim PWT
Technical Specifications
| Adhesion strength | >2 N/mm² |
|---|---|
| Appearance | Liquid coating |
| Application temperature | +5°C to +35°C |
| Compressive strength | 80 N/mm² |
| Consumption | 5 m²/Liter at 200 micron DFT |
| Flexural strength | 40 N/mm² |
| Full cure | 7 days |
| Initial cure | 24 hours |
| Mix density at 25°C | 1.58 kg/L |
| Packaging | 4 and 15 liter cans |
| Pot life at 25°C | 30 minutes |
| Service temperature | -5°C to +80°C |
| Tensile strength | 11 N/mm² |
| VOC | 8.0 g/L |
| WRAS | Passed |
Common
| Color | Grey, white & blue |
|---|---|
| Shelf life | 12 months |
Review 0
-
There are no reviews for this product.
FAQ 0
-
No questions yet
You watched
