Vetoproof CM745
AED0.00
Vetoproof CM745
New
Specification
| ApplicationInternal & External | Application MethodBrush, Roller | Bonds to Damp ConcreteYes |
| Carbonation ProtectionYes | Chloride BarrierYes | ClassificationCementitious Waterproofing |
| ColorWhite, Grey | ComponentsSingle Component | Crack BridgingYes (up to 0.3 mm) |
Found cheaper?
Description
Vetoproof CM745 is a two-component flexible polymer modified cementitious waterproof coating with unique crack bridging characteristics even after long term water immersion. The product is suitable for use and contact with potable water and can withstand negative hydrostatic pressure.
Uses:
- Waterproof lining for water tanks, dams, canals, etc.
- Covered roofs and wet-areas waterproofing while receiving tile adhesives
- Protecting concrete and masonry structures against ingress of chloride ions and carbonation
- Negative hydrostatic pressure resistance
- Protection of natural tiles back side
Advantages:
- Non-toxic — approved for contact with drinking water
- Flexible, crack bridging
- Ready to receive tile adhesives
- Withstands high positive and negative hydrostatic pressures
- Easy application by brush or roller
- Bonds to damp concrete
- Effective barrier to sulfates and chlorides
- Excellent bond to concrete and masonry
Specifications Vetoproof CM745
Common
| Application | Internal & External |
|---|---|
| Application Method | Brush, Roller |
| Bonds to Damp Concrete | Yes |
| Carbonation Protection | Yes |
| Chloride Barrier | Yes |
| Classification | Cementitious Waterproofing |
| Color | White, Grey |
| Components | Single Component |
| Crack Bridging | Yes (up to 0.3 mm) |
| Drying Time Between Coats | 1–16 hours (depending on conditions) |
| Full Cure Time | 7 days |
| Mixing Speed | 300–500 rpm |
| Negative Hydrostatic Pressure | Yes |
| Number of Coats | 2 coats |
| Positive Hydrostatic Pressure | Yes |
| Potable Water Safe | Yes |
| Primer Coverage | 5 m²/L |
| Primer Required | Yes (Vetoprime AP443) |
| Suitable Areas | Water Tanks, Dams, Canals, Wet Areas, Roofs |
| Sulfate Barrier | Yes |
| Tile Adhesive Compatible | Yes |
| Type | Polymer Modified, Two-Component |
| Wet Film Thickness | 1 mm per coat |
| Coverage | 1.7 kg/m² or 1 L/m² per coat |
Review 0
-
There are no reviews for this product.
FAQ 0
-
No questions yet
